Konica Minolta bizhub C654 User Manual page 19

Using License Install Utility
5
Below "Settings group" on the left side of the dialog box, click
"OpenAPI".
The OpenAPI settings for the device can be edited on the right side of
the dialog box.
6
Check or edit the necessary information.
– OpenAPI port: Type in the number of the port used with OpenAPI.
– OpenAPI port (SSL): Type in the number of the port used with
OpenAPI during SSL communication.
– Set the user name and the password of OpenAPI: Select this check
box to specify the OpenAPI user name and password.
– OpenAPI user name: Type in the user name for logging on with
OpenAPI.
– OpenAPI password: Type in the password for logging on with
OpenAPI.
– OpenAPI password (confirm): For confirmation, again type in the
password for logging on with OpenAPI.
7
Click the [OK] button.
The edited settings are saved, and the Device information edit dialog
box is closed.
License Install Utility
3
3-11