Panasonic Workio DP-190 Operating Instructions Manual page 55

3
Turn On the Power Switch
(Machine and the PC).
For more detailed information, refer to Windows OS operating instructions manual.
For Windows 2000
1 Right click "My Network
Places" and select
"Properties".
For Windows XP
1 Open the Control Panel.
5
6
9
"OK" will be changed to "CLOSE".
4
Input the Network Address
(Machine and your PC).
● IP and Gateway Address
IP: 192.168.0.1 (Machine)
192.168.0.2 (Your PC)
Subnet Mask: 255.255.255.0
(Machine & the PC)
● How to input the network address:
For your Machine: See page 44
For your PC:
2 Right click "Local Area
Connection" and select
"Properties".
2
3
2 Select "Switch to Classic
View", if using the
Category View Mode.
3
Select "Network
Connections".
5
Select "Internet
Protocol (TCP/ IP)".
6
Click "Properties".
9
Click "CLOSE".
5
NOTE:
* If you use the DHCP server, select
See below
to disable the DHCP server.
Machine : See page 45.
Your PC : Consult your System
3
7
3
Select "Internet
Protocol (TCP/ IP)".
4
Click "Properties".
7 Click "OK".
4 Right click "Local Area
Connection Enabled ........"
and select "Properties".
7
7
Select "Use the following
IP address" then, Input IP
Address and the Subnet
Mask.
8 8
Click "OK".
Administrator.
5
4
6
5
Select "Use the
following IP address"
then, Input IP Address
and the Subnet Mask.
6
Click "OK".
4
5
55