Direct Connection (With Crossover Cable) - Panasonic Workio DP-190 Operating Instructions Manual

Network Scanner

Direct Connection (with Crossover Cable)

■ Direct Connection (with Crossover Cable)
1
Turn OFF* the Power
Switch (Machine and the
PC).
5
Turn OFF* and ON the
Power Switch (Machine
and the PC).
NOTE:
*If the Hard Disk Drive Unit (DA-HD19) is installed, see page 13.
54
Connect a Crossover LAN Cable between your machine
2
and the PC.
To
Machine
LAN Cable (Crossover)
(Rear Side of Machine)
NOTE: Do not use Standard
LAN Cable.
6
Input your PC's IP
Address into the Address
Book in the machine (see
page 48) or into the
Panasonic-DMS software
(refer to the enclosed CD).
To PC
LAN Cable (Crossover)
(Rear Side of PC)
7
Scan the document(s) to
your PC. (See page 46)