Time Delay Settings; Voltage And Frequency Settings - Emerson ASCO 185 Series Operator's Manual

Series 185
S1 DIP switch
Figure 6. DIP switches S1 and S2 at the top right.
The time delay settings are shown in Figures 6 and 7 and
in Table C. The sensor settings are shown in Figure 6
and in Table D. The standard (factory) settings are
shown in Tables C, D, and H.
Time Delay Description
override momentary override momentary
utility outages
transfer to generator
override momentary override momentary
generator outages
transfer to utility
unloaded running unloaded running
(generator cooldown)
Setting Description Setting
voltage
frequency frequency nominal nominal
phase
utility voltage utility voltage
dropout dropout
generator voltage generator voltage
dropout
generator frequency
dropout
381333–319 D
S2 DIP switch
Table C. Time Delay Settings
Factory Setting
3 seconds 3 seconds
10 seconds (approx.)
4 seconds 4 seconds
5 minutes (approx.)
2 minutes 2 minutes
Table D. Voltage and Frequency Settings
Factory Setting
– 220 – 240 V
60 Hz 60 Hz
– single
pickup pickup 198 V 198 V
187 V 187 V
pickup 198 V
165 V
57 Hz (nom 60 Hz)
pickup
48 Hz (nom 50 Hz)
51 Hz (nom 60 Hz)
43 Hz (nom 50 Hz)
* If the dropout voltage is set to 198 V, the pickup voltage must be set to 209 V.
CONTROLLER (continued)
S3 DIP switch
Figure 7. DIP switch S3 at the bottom center.
Settings DIP Switch
1 second S2
3 seconds S2
– –
4 second S3
0 S3
– –
2 minutes S1
5 minutes S1
Settings DIP Switch
non–adjustable S2
50 Hz S1
60 Hz S1
non–adjustable S1
198 V S1
209 V * S1
S1
198 V * 198 V *
S1
S1
187 V 187 V
S1
S1
176 V 176 V
S1
S1
154 V 154 V
S1
non–adjustable non–adjustable – –
non–adjustable non–adjustable – –
4
DIP Actuator Actuator Position
1 on (up)
1 off (down)
– –
9 on (up)
9 off (down)
– –
10 on (up)
10 off (down)
DIP Actuator Actuator Position
2 on (up)
4 on (up)
4 off (down)
6 on (up)
3 on (up)
3 off (down)
1 off (down)
2 off (down)
1 on (up)
2 off (down)
1 off (down)
2 on (up)
1 on (up)
2 on (up)
– – – –
– – – –