Table of Contents
Advertisement
3.6.5
PCIPnP
The PCIPnP menu items allow you to change the advanced settings for PCI/PnP devices.
Advanced
Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
Plug And Play O/S
Plug And Play O/S [No]
When set to [NO], BIOS configures all the devices in the system. When set to [YES] and if
you install a Plug and Play operating system, the operating system configures the Plug and
Play devices not required for boot.
Configuration options: [No] [Yes]
3.7
Power menu
The Power menu items allow you to change the settings for the Advanced Power
Management (APM). Select an item then press <Enter> to display the configuration options.
Main Ai Tweaker Advanced Power Boot Tools Exit
Suspend Mode
Repost Video on S3 Resume
ACPI 2.0 Support
ACPI APIC Support
APM Configuration
Hardware Monitor
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
3.7.1
Suspend Mode [Auto]
Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used
for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]
3.7.2
Repost Video on S3 Resume [No]
Determines whether to invoke VGA BIOS POST on S3/STR resume.
Configuration options: [No] [Yes]
3.7.3
ACPI 2.0 Support [Disabled]
Add additional tables as per ACPI 2.0 specifications.
Configuration options: [Disabled] [Enabled]
3-24
BIOS SETUP UTILITY
[No]
BIOS SETUP UTILITY
[Auto]
[No]
[Disabled]
[Enabled]
NO: lets the BIOS
configure all the
devices in the
system.
Select the ACPI state
used for System
Suspend.
←→ Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 3: BIOS setup
Hide quick links:
Advertisement
Table of Contents
