Usb Configuration - Asus P6T SE - Motherboard - ATX User Manual

3.6.4

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then
press <Enter> to display the configuration options.
Advanced
USB Configuration
USB Devices Enabled:
1 Mouse
USB Functions
USB 2.0 Controller
USB 2.0 Controller Mode
BIOS EHCI Hand-Off
Legacy USB Support
The USB Devices Enabled item shows the auto-detected values. If no USB device is
detected, the item shows None.
USB Functions [Enabled]
Allows you to enable or disable the USB Host Controllers.
Configuration options: [Disabled] [Enabled]
The USB 2.0 Controller, USB 2.0 Controller Mode, and Legacy USB Support items
appear only when you set USB Functions to [Enabled].
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller.
Configuration options: [Enabled] [Disabled]
USB 2.0 Controller Mode [HiSpeed]
This item appears only when you enabled the USB 2.0 Controller item and allows you to set
the USB 2.0 controller mode to HiSpeed (480 Mbps) or FullSpeed (12 Mbps).
Configuration options: [FullSpeed] [HiSpeed]
BIOS EHCI Hand-off [Enabled]
Allows you to enable the support for operating systems without an EHCI hand-off feature.
Configuration options: [Disabled] [Enabled]
Legacy USB Support [Auto]
Allows you to enable or disable the support for legacy USB devices. Setting to [Auto] allows
the system to detect the presence of USB devices at startup. If detected, the USB controller
legacy mode is enabled. If no USB device is detected, the legacy USB support is disabled.
Configuration options: [Disabled] [Enabled] [Auto]
ASUS P6T SE
BIOS SETUP UTILITY
[Enabled]
[Enabled]
[HiSpeed]
[Enabled]
[Auto]
Options
Disabled
Enabled
3-23