Memory Configurations - Asus P6T SE - Motherboard - ATX User Manual

2.4.2

Memory configurations

You may install 1GB, 2GB and 4GB unbuffered and non-ECC DDR3 DIMMs into the DIMM
sockets.
• You may install varying memory sizes in Channel A, Channel B and Channel C. The
system maps the total size of the lower-sized channel for the dual-channel or triple-
channel configuration. Any excess memory from the higher-sized channel is then
mapped for single-channel operation.
• Due to Intel spec definition, X.M.P. DIMMs and DDR3-1600 are supported for one
DIMM per channel only.
• According to Intel CPU spec, DIMMs with voltage requirement over 1.65V may
damage the CPU permanently. We recommend you install the DIMMs with the voltage
requirement below 1.65V.
• Always install DIMMs with the same CAS latency. For optimum compatibility, we
recommend that you obtain memory modules from the same vendor.
• Due to the memory address limitation on 32-bit Windows OS, when you install 4GB or
more memory on the motherboard, the actual usable memory for the OS can be about
3GB or less. For effective use of memory, we recommend that you install a 64-bit
Windows OS when having 4GB or more memory installed on the motherboard.
• This motherboard does not support DIMMs made up of 256 megabit (Mb) chips or
less.
• The default memory operation frequency is dependent on its SPD. Under the default
state, some memory modules for overclocking may operate at a lower frequency than
the vendor-marked value.
• For system stability, use a more efficient memory cooling system to support a full
memory load (6 DIMMs) or overclocking condition.
P6T SE Motherboard
Qualified Vendors Lists (QVL) DDR3-2000MHz capability
Vendor Part No.
BoxP/N:
TW3X2G2000DFNV
CORSAIR
(CM3X1G2000DFNV)
(EPP)
OCZ OCZ3FXT20002GK
OCZ3P20002GK
OCZ
(EPP)
Gingle 9CAASS37AZZ01D1
P6T SE Motherboard
Qualified Vendors Lists (QVL) DDR3-1866MHz capability
Vendor Part No.
KHX14900D3K3/3GX
KINGSTON
(XMP)
AXH760UD10-18J
Aeneon
(XMP)
AXH860UD20-18J
Aeneon
(XMP)
ASUS P6T SE
SS/ Chip
Size Chip NO.
DS Brand
2GB Heat-Sink
DS N/A
(Kit of 2) Package
2GB Heat-Sink
SS N/A
(Kit of 2) Package
2GB Heat-Sink
SS N/A
(Kit of 2) Package
Heat-Sink
2GB DS N/A
Package
SS/ Chip
Size Chip NO.
DS Brand
3GB Heat-Sink
SS N/A
(Kit of 3) Package
Heat-Sink
1GB SS N/A
Package
Heat-Sink
2GB DS N/A
Package
Timing
Voltage
DIMM (BIOS)
8-8-8-24 1.9
8 1.9
9 1.9
9-9-9-24
DIMM socket support
Timing
(Optional)
Voltage
DIMM (BIOS)
A*
(1333-9-9-9-24) 1.65 •
CL10
•
(1333-8-8-8-24)
CL10
•
(1333-8-8-8-24)
DIMM socket support
(Optional)
A* B*
•
•
•
•
B*
•
•
•
2-11