C Special Playback; Rental Playback; Auto Repeat Playback - Emerson EWC19T4 Owner's Manual

Make sure ...
•
The unit is turned on.
•
Insert a prerecorded tape.

RENTAL PLAYBACK

This function enables you to improve the picture
quality when playing back worn cassettes such as
rented tapes.
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "USER'S SET UP".
Then press the ENTER button.
2
Set "RENTAL" to [ON]
Press the Arrow button K or L to
point to "RENTAL".
Press the ENTER button until [ON]
appears.
3
Exit the Rental setting
Press the SETUP button on the remote control to
return to the TV mode.
4
Start playback
Press the PLAY button to start playback. "RENTAL
PLAY B" appears.
•
Once you select the Rental mode, it stays in effect
even after you turn off the unit.
TO CANCEL THE RENTAL MODE
Repeat steps [1] to [2] and select [OFF] using the
ENTER button on the remote control. Press the
SETUP button on the remote control to return to TV
mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
SPECIAL PLAYBACK
The unit has the auto repeat function that allows you
to repeat a tape indefinitely without touching the
PLAY button.
TV/VCR
ALL REPEAT:
BLANK REPEAT
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
1
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
Press the SETUP button on the
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
remote control.
TIME SEARCH
INDEX SEARCH
Press the Arrow button K or L to
point to "USER'S SET UP", then
press the ENTER button.
– USER'S SET UP –
2
B RENTAL [ON]
REPEAT PLAY [OFF]
Press the Arrow button K or L to
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
point to "REPEAT PLAY".
Press the ENTER button repeatedly
until your desired selection [ALL]
or [BLANK] appears.
3
Press the SETUP button on the remote control to
return to the TV mode.
4
Press the PLAY button to start the Repeat Play.
"REPEAT PLAY B" appears.
•
•
TO CANCEL THE REPEAT PLAY MODE
Repeat steps [1] to [2] and select [OFF] using the
ENTER button on the remote control. Press the
SETUP button on the remote control to return to TV
mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature.
- 27 -

AUTO REPEAT PLAYBACK

Repeat playback from the beginning
to the end of the tape.
: Repeat playback from the begin-
ning to a blank part, which is blank for more than
10 seconds.
Select "USER'S SET UP"
Select "ALL" or "BLANK"
Exit the Repeat Play setting
Start playback
Once you select Repeat Play mode, it stays in
effect even after you turn off the unit.
If Rental Play mode is set to [ON], "RENTAL
PLAY B" display has priority.
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER'S SET UP –
RENTAL [OFF]
B REPEAT PLAY [ALL]
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
TV AUDIO [STEREO]
EN
1C29