Page 1
® energy efficiency. E NERGY is a U.S. registered mark. “EMERSON AND THE G-CLEF LOGO ARE REGISTERED TRADEMARKS OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A.” (27 inch) If you need additional assistance for set-up or operating after reading owner’s manual, please call TOLL FREE : 1-800-256-2487.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
Page 3
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECT RICAL CODE NEC - NATI O NAL EL ECTRI CAL CO DE S2 8 9 8 A 13.Outdoor Antenna grounding-If an outside antenna or cable system is connected to the TV/VCR/DVD, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges.
IMPORTANT COPYRIGHT INFORMATION Unauthorized copying, broadcasting, public perfor- mance and lending of discs are prohibited. This product incorporates copyright protection tech- nology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
LOCATION For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when selecting a place for its installation: • Shield it from direct sunlight and keep it away from sources of intense heat. • Avoid dusty or humid places. •...
TV/VCR Mode • The Hi-Fi stereo recording system Hi-Fi system– offers you excellent sound quality with a dynamic range of 80dB, frequency response from 20Hz to 20kHz and 0.005% wow and flutter. • Rotary 4-head Record/Playback System– ensure excellent picture quality and special effects playback. •...
Page 8
DVD Mode ¡ Dolby Digital sound This TV/VCR/DVD can handle Dolby Digital sur- round sound having 5.1 channels when connected to a Dolby Digital decoder ¡ Still/fast/slow/step playback Various playback modes are available including still pictures, fast forward/reverse, slow motion and step frames.
OPERATING CONTROLS AND FUNCTIONS - TV/VCR/DVD FRONT PANEL - [Fig.1] DVD buttons POWER p VOLUME o H SKIP BPLAY SEARCH - REMOTE CONTROL - POWER PICTURE SLEEP SELECT PAUSE +100 SPEED C.RESET V.SURR MUTE (DVD) PLAY (TV/VCR) STOP RECORD DISPLAY ENTER SETUP TITLE...
Page 10
- TV/VCR/DVD REAR PANEL - [Fig.3] ANT. AUDIO L/R input Jacks Connect to the audio output jacks of a video camera or VCR. Cassette compartment PICTURE Button Press to adjust the picture. Number Buttons TV Mode: [P.15] Press two digits to directly access the desired channel.
ANT. in Jack Connect to an antenna, cable system, or satellite system. Power cord Connect to a standard AC outlet (120V/60Hz). Remove the power cord from the hook to NOTE: avoid breaking a wire before you connect to a standard AC outlet. PREPARATION FOR USE ANTENNA/CABLE CONNECTION Satellite Box or...
TO RECORD A SCRAMBLED/UNSCRAM- BLED CHANNEL 1. Set the TV/VCR/DVD channel selector to the out- put channel of the Cable Converter Box or Satellite Box. (Ex. CH3) 2.Select the channel to record from your Cable Converter Box or Satellite Box. Note to CATV system installer: This reminder is provided to call the CATV sys- tem installer’s attention to Article 820-40 of the...
CONNECTING TO A STEREO AMPLIFIER EQUIPPED WITH DIGI- TAL INPUT JACKS SUCH AS MD DECK OR DAT DECK (for DVD) Use an audio coaxial digital cable available at retail for the audio connections. Connecting to an amplifier equipped with digital input jacks such as MD Deck or DAT Deck. Amplifier equipped with digital input jacks, MD deck, DAT deck, etc.
CONNECTING TO A DOLBY DIGITAL DECODER (for DVD) If using this TV/VCR/DVD to play a DVD disc in a 5.1 channel Dolby Digital surround format, the TV/VCR/DVD outputs a DOLBY DIGITAL Data stream from its COAXIAL digital audio out jack. By hook- ing the TV/VCR/DVD up to a Dolby Digital decoder, you can enjoy a more convincing, realistic ambience with powerful and high-quality surround sound as enjoyed in movie theaters.
SELECTING THE LANGUAGE Plug in the TV/VCR/DVD power cord Plug the TV/VCR/DVD power cord into a standard AC outlet. NOTE: • If any digits appear in the corner of the screen, press the POWER button without unplug- ging the power cord. Make sure ...
Select the year Press the Arrow button K or L until your desired year appears. (Example: 2004) Then press the Arrow button B. Select the hour Press the Arrow button K or L until your desired hour appears. (Example: 5, PM) Then press the Arrow button B.
NOTE: During Auto Clock CH Search, the picture may be distorted, this is normal. Enter the channel number that contains the Automatic Clock Setting Signal Press the SETUP button on the remote control. Press the Arrow button K or L to select “SETTING CLOCK”.
CHANNEL SET UP You can program the tuner to scan all the channels you receive in your area. NOTE: Channel memory programming is NOT needed when connected to a cable box or satellite box. Just select the TV/VCR/DVD channel selector to the output channel of the cable box or satellite box (Ex CH3), then select the channel to be viewed on the Cable Box or Satellite Box.
WATCHING A TV PROGRAM Turn on the TV/VCR/DVD Press the POWER button to turn on the TV/VCR/DVD. Select the channel number Press the CHANNEL button K or L to select your desired channel number or press the number on the remote control.
CLOSED CAPTION SYSTEM You can view specially labeled (cc) TV programs, movies, news and pre-recorded tapes with either a dialogue caption or text display. By choosing the caption mode, you CAPTION mode: can watch dramas, movies and news while captioning the dialogues and the contents of news.
V-CHIP SET UP V-CHIP SET UP Make sure ... • TV/VCR/DVD is turned on. Select “V-CHIP SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to select “V-CHIP SET UP”. Then press the ENTER button. Enter Access code Use the number buttons on the remote control to enter the access code.
CHANGING V-CHIP BLOCKED PRO- GRAMMING Note: To change the rating, the TV must be turned to a station that is not protected. If the (PROTECTED) appears on the screen, please change the channel to a station that is not protected. 1)Follow steps [1] and [2].
MTS(Multi-Channel Television sound)SYSTEM You can record or listen to a program in MTS stereo. CHECKING THE SELECTED MTS MODE When you play a VHS tape, or receive a broadcast on the tuner channel you are watching, TV/VCR/DVD the status shown below will appear when you press the DISPLAY button on the remote control.
SELECTING THE MTS SYSTEM Make sure ... • TV/VCR/DVD power must be turned on. TO SELECT HIFI MODE Select “USER’S SET UP” Press the SETUP button on the remote control. Press the Arrow button K or L to point to “USER’S SET UP”. Then press the ENTER button.
This TV/VCR/DVD will operate with any cassette that has the we recommend the use of high-quality tapes. Do not use poor quality or damaged tapes. PRECAUTIONS • Avoid moisture. Moisture condensation may occur on the tape if it is moved from a cold place to a warm place or visa versa.
NORMAL PLAYBACK Make sure ... • TV/VCR/DVD power must be turned on. Insert a prerecorded tape If the erase-protection tab has been removed, the TV/VCR/DVD will start playback automatically. To begin playback Press the PLAY button. To stop playback Press the STOP button when play- back is completed.
Make sure ... • TV/VCR/DVD’s power must be turned on. • Insert a prerecorded tape. RENTAL PLAYBACK This function enables you to improve the picture quality when playing back worn cassettes such as rented tapes. Select “USER’S SET UP” Press the SETUP button on the remote control.
Make sure ... • TV/VCR/DVD power must be turned on. • Insert a tape. ZERO RETURN This function allows you to search easily a beginning point that you want to review by rewinding or fast forwarding. NOTE: Zero Return WILL NOT work on a blank tape or a blank portion of a tape.
INDEX SEARCH This feature provides a method of indexing the start- ing point so that it can be easily returned to in either fast forward or rewind mode. • The index mark will be made automatically when the RECORD button is pressed. It will also be marked at the starting point of Timer recording and OTR.
Make sure ... • TV/VCR/DVD power must be turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary, rewind or fast forward the tape to the point at which you want to begin recording.) NOTES: •...
OTR (One Touch Recording) This function enables you to set a recording length simply by pressing the REC/OTR button on the TV/VCR/DVD. Make sure ... • TV/VCR/DVD power must be turned on. • Insert a cassette tape with its erase prevention tab in place.
AUTOMATIC TIMER RECORDING You may set the TV/VCR/DVD to start and end a recording while you are away. You can set 8 pro- grams to record on specific days, daily or weekly within a 1 year period. In the example below, the timer is being set to record: DATE: July 4th, 2004 SETTING TIME: from 7:30PM to 8:50PM...
Page 33
Set beginning hour Press the Arrow button K or L until the desired hour appears. (Example: “ 7, PM” for 7:30PM) Then press the Arrow button B. Set beginning minute Press the Arrow button K or L until the desired minute appears. (Example: “30”...
TO CHECK THE BEGIN/END TIME 1)Press the POWER button so that the Recording indicator goes off. 2)Press the SETUP button on the remote control. 3)Confirm “TIMER PROGRAMMING” is pointed. 4)Press the ENTER button. The details of programs appear on the TV screen. 5)Press the SETUP button on the remote control to return to TV mode.
To check the Counter, Clock and Channel number on the TV screen, press the DISPLAY button on the remote control. Each time you press the DISPLAY button on the remote control, the TV screen will change as follows: When the Closed Caption mode is OFF: •...
DVD SECTION PLAYABLE DISCS The following discs can be played back on this TV/VCR/DVD. ¡ DVD video ¡ DVD+R/RW* ¡ CD-R/RW* * Depending on the types or the writing method of the medium some discs can not be played. • Some DVD-R/RW, DVD+R/RW, or CD-R/RW discs made on personal computers or on DVD recorders may not be played back properly due to the factors such as scratches, dirt or special properties of the disc.
BASIC PLAYBACK DVD-V Getting started ¡ Turn on the power of amplifier and any other com- ponents, if necessary. Press the POWER button. ¡ The power will turn on. Press the OPEN/CLOSE button to open disc loading tray. Place the chosen disc in the tray, with the label facing up.
RESUME DVD-V During playback, press the STOP button. ¡ Resume message will appear on the TV screen. Press the PLAY button, playback will resume from the point at which playback was stopped. ¡ To cancel resume, press the STOP button twice. ¡...
TRACK SEARCH There are three ways to begin playback on an Audio CD and MP3 at a specific track. Using the Number buttons on the remote control Press the Number buttons to enter the desired Track number. ¡ Playback will start at the selected track. ¡...
SPECIAL PLAYBACK FUNCTION REPEAT REPEAT is available only during playback. REPEAT TITLE / CHAPTER To activate the repeat function, press the REPEAT button during playback. ¡ The repeat mode changes as described below every time you press the button. CHAPTER TITLE (current chapter repeat) (current title repeat) NOTES...
MP3 PLAYBACK When a CD with MP3 files is in the TV/VCR/DVD, press the DISC MENU button to call up the MP3 menu on the TV screen. In stop mode, press the Arrow button ( to select the desired group or track. ¡...
CHANGING THE SETTINGS SUBTITLE LANGUAGE The TV/VCR/DVD allows you to select a language for subtitles during DVD disc (if available) playback. Press the SUBTITLE button during playback. Press the SUBTITLE button repeatedly to select your desired subtitle language. ¡ The subtitle language will appear on the display bar at the top of the TV screen.
THE ON-SCREEN INFORMATION You can check the information about the current disc by pressing the DISPLAY button on the remote control. For DVD-Vs Press the DISPLAY button during playback to show current Chapter. ¡ The elapsed and remaining playing time of the current chapter will be displayed.
CHANGING THE DVD SETUP ITEMS Language options are not available with some discs. Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice. SETUP QUICK CUSTOM...
DISPLAY SETTING You can change certain aspects of the DVD display screens and on-screen messages on the TV screen. Press the SETUP button twice in STOP mode so that the DVD SETUP menu appears. ¡ If the menu does not appear, press the PLAY button, the STOP button, then the SETUP button twice.
PARENTAL CONTROL Parental Control limits the disc viewing that exceed your settings. (with a password or playback will stop.) This feature allows you to prevent discs with alterna- tive scenes from being played by your children. PARENTAL LEVEL Parental Level allows you to set the rating level of your DVD discs.
TROUBLESHOOTING GUIDE If the TV/VCR/DVD does not perform properly when operated as instructed in this Owner’s Manual, check the TV/VCR/DVD, consulting the following checklist. PROBLEM No power The TV/VCR/DVD does not respond to the remote control TV/VCR Mode Sometimes a performance problem can be easily solved by checking seemingly apparent but often overlooked possibilities.
Page 48
PROBLEM Picture OK, Sound Poor Timer recording is not possible Cannot go into Record mode Playback picture is partially noisy No picture but the audio is OK in playback No operation by infrared Remote Control Video or color fades in and out when making a copy of a video tape Different color marks on screen CLOSED CAPTION PROBLEM...
Page 49
DVD Mode PROBLEM No picture Disc cannot be played No sound No DTS audio is output Distorted picture Audio or subtitle language does not match the set up The camera angle cannot be changed • The DVD does not contain sequences recorded from different camera Audio or subtitle language cannot be •...
CABINET CLEANING • Wipe the front panel and other exterior surfaces of the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry. • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR/DVD. Such chemi- cals may cause damage and discoloration to the exposed surfaces.
GENERAL SPECIFICATIONS TV/VCR 27 inch in-line gun, 90˚ deflection tube Television system : NTSC-M Closed caption system :§15.119/FCC Video Heads : Rotary four-head Tape width : 1/2 inch Tape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 11.12mm/sec. Tuner channel TV VHF Low : #2~#6 TV VHF High :...
INDICE ■ CONTROLES DE OPERACIÓN Y FUNCIONES ..52 PANEL FRONTAL DEL TELEVISOR/DVD..52 MANDO A DISTANCIA ......52 VISTA POSTERIOR .
Page 53
30. Botón CLEAR Para cancelar ajustes. 31. Botón MODE Activa el modo de reproducción programada o el modo de reproducción aleatoria. 32. Botón SEARCH MODE Presione este botón para localizar un punto deseado. 33. Botón AUDIO Presione este botón para seleccionar un idioma de audio o el modo de sonido deseado.
PARA INSERTAR LAS PILAS 1) Abra la cubierta del compartimiento de las pilas empujando la cubierta del mando a distancia en el sentido de la flecha. 2) Inserte 2 pilas "AA" en el compartimiento de las pilas, en el sentido indicado por las marcas de polaridad (+/-). 3) Vuelva a poner la cubierta.
NOTA: Si, por alguna razón, el menú está en inglés o francés, pulse el botón SETUP en el mando a distancia, pulse el botón K o L para señalar el “LANGUAGE [ENGLISH]” o “LANGAGE [FRANÇAIS]”, a contin- uación, pulse el botón ENTER y pulse el botón SETUP en el mando a distancia.
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman- ship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase.