Emerson EWC19T4 Owner's Manual page 24

Make sure ...
•
The unit is turned on.
TO SELECT HIFI MODE
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "USER'S SET UP".
Then press the ENTER button.
2
Select "VCR AUDIO"
Press the Arrow button K or L to
point to "VCR AUDIO".
3
Select [HIFI]
Press the ENTER button until
[HIFI] appears.
4
To return to TV mode
Press the SETUP button on the remote control to
return to TV mode.
NOTES:
•
Normally "HIFI" should be selected for playback
with HIFI sound.
•
When you play non-HIFI tapes, the unit will auto-
matically play in the monaural mode.
•
The unit records automatically MTS broadcasts in
HIFI stereo sound unless you select [SAP] before
recording.
SELECTING THE MTS SYSTEM
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER'S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
B VCR AUDIO [HIFI]
TV AUDIO [STEREO]
– USER'S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
B VCR AUDIO [HIFI]
TV AUDIO [STEREO]
- 24 -
TO SELECT MONO MODE
You can change the selection to "MONO" if you
want to listen to HIFI tapes in normal audio play-
back.
1) Press the SETUP button on the remote control.
Press the Arrow button K or L to point to "USER'S
SET UP". Then press the ENTER button.
2) Press the Arrow button K or L to point to
"VCR AUDIO".
3) Press the ENTER button until [MONO] appears.
4) Press the SETUP button on the remote control to
return to TV mode.
TO SELECT [STEREO], [SAP] OR [MONO]
1
Select "USER'S SET UP"
Press the SETUP button on the
remote control.
Press the Arrow button K or L to
point to "USER'S SET UP".
2
Select "TV AUDIO"
Press the Arrow button K or L to
point to "TV AUDIO".
3
Select [STEREO], [SAP] or [MONO]
Press the ENTER button until [STEREO], [SAP] or
[MONO] appears.
4
To return to TV mode
Press the SETUP button on the remote control to
return to TV mode.
NOTES:
•
You must select the recording mode,either TV
AUDIO [STEREO] or [SAP] when you record a
broadcast.
(Refer to MTS RECORDING/MONITOR MODE
on page 23.)
•
If you select [SAP] when second audio is not avail-
able, the unit will record normal audio.
•
The unit records automatically MTS broadcasts in
HIFI stereo sound unless you select [SAP] before
recording.
TV/VCR
- TV/VCR SETUP -
TIMER PROGRAMMING
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
INDEX SEARCH
– USER'S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
AUTO RETURN [OFF]
VCR AUDIO [HIFI]
B TV AUDIO [STEREO]
EN
1C29