Overview; Feature Summary - Intel D945PLNM Specification

Intel Desktop Board D945PLNM Technical Product Specification

1.1 Overview

1.1.1 Feature Summary

Table 1 summarizes the major features of the board.
Table 1.

Feature Summary

Form Factor
Processor
Memory
Chipset
Audio
Legacy I/O Control
USB
Peripheral
Interfaces
LAN Support
BIOS
Expansion
Capabilities
10
microATX (9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters])
Support for the following:
• Intel
® ®
Pentium D processor in an LGA775 socket with an 800 MHz system bus
• Intel
® ®
Pentium 4 processor in an LGA775 socket with an 800 or 533 MHz
system bus
• Intel
® ®
Celeron D processor in an LGA775 socket with a 533 MHz system bus
• Two 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets
• Support for DDR2 533 or DDR2 400 MHz DIMMs
• Support for up to 2 GB of system memory
®
Intel 945PL Chipset, consisting of:
• Intel
®
82945PL Memory Controller Hub (MCH)
• Intel
®
82801G I/O Controller Hub (ICH7)
6-channel (5.1) audio subsystem with three analog audio outputs using the
Sigmatel* 9220 audio codec
Legacy I/O controller for diskette drive, serial, parallel, and PS/2* ports
• Support for USB 2.0 devices
• Support for USB anti-theft circuitry on back-panel USB connectors (requires the
®
use of Intel Platform Administrator Technology software, available separately)
• Eight USB ports
• One serial port
• One parallel port
• Four Serial ATA interfaces
• One Parallel ATA IDE interface with UDMA 33, ATA-66/100 support
• One diskette drive interface
• PS/2 keyboard and mouse ports
10/100 Mbits/sec LAN subsystem using the Intel
(PLC) device with ASF 1.03 support
• Intel
®
BIOS (resident in the SPI Flash device)
• Support for Advanced Configuration and Power Interface (ACPI), Plug and Play,
and SMBIOS
• Two PCI Conventional* bus connectors
• One PCI Express* x1 bus add-in card connector
• One PCI Express x16 bus add-in card connector
® 82562GX Platform LAN Connect
continued