Setting The Bios Configuration Jumper - Intel D102GGC2 Product Manual

Setting the BIOS Configuration Jumper

NOTE
Always turn off the power and unplug the power cord from the computer before changing the
jumper. Moving the jumper with the power on may result in unreliable computer operation.
Figure 24 shows the location of the desktop board's BIOS configuration jumper block.
Figure 24. Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configuration to be done in the BIOS Setup
program. Table 9 shows the jumper settings for the Setup program modes.
Installing and Replacing Desktop Board Components
1
2
3
BR1
OM19154
45