Table of Contents
Advertisement
Press
Enter
channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing
Zone, and Sector are automatically filled in.
None
There is no HDD installed or set.
Auto
The system can auto-detect the hard disk when booting up.
Manual
When you set the channel to
you can then enter the number of cylinders, heads, Precomp, landing zone,
and sector. You can manually enter the values or you can press
display a window that tells you the min and max values.
IDE HDD Auto-Detect
IDE Channel 0 Slave
Access Mode
C
a
p
a
c
i
t
Cylinder
Head
Precomp
Landing Zone
Sector
The BIOS supports the following HDD
Access Modes:
CHS
For HDD less than 528 MB.
LBA
For HDD greater than 528 MB and
supporting LBA (Logical Block
Addressing).
Large
For HDD greater than 528 MB but not supporting LBA.
Auto
Recommended mode.
EVGA | 40
to auto-detect IDE and SATA channels in the system. Once the
[Manual]
[Press Enter]
[Manual}
[CHS]
y
.....0
[
[
[
[
and change
Access Mode
Press ENTER to display sub-menu
0
M
B
or enter number manually
0]
0]
Cylinder
0]
0]
Min=
Max=65535
Key in a DEC number :
:Move
to
,
,
[CHS]
to
Enter
0
ENTER:Accept
ESC:Abort
Advertisement
Table of Contents
