Nokia Holder Easy Mount HH-12 User Manual page 5

cup and the windshield. Check that
the suction cup is firmly attached.
To detach the mounting device from
the windshield, carefully push the
Set to the desired position
Do not adjust the mounting device
while driving.
To set the top of the mounting device
to the desired position, loosen the
two screws in the middle of the
mounting device, turn the top to the
desired position, and tighten the
Mount the mobile holder
To attach a compatible Nokia mobile
holder to the mounting plate, use the
screw supplied with the holder.
For example, to use the mobile holder
CR-39, remove the protection plate
locking lever toward the top of the
mounting device (3), and pull the
strap located on the edge of the
suction cup (4).
screws (5). Ensure that the top of the
device is firmly locked into place.
To set the mounting plate at the top
of the mounting device to the desired
position, loosen the screw below the
plate, turn the plate to the desired
position, and tighten the screw (6).
with the Nokia text from the holder,
attach the holder to the mounting
plate with the supplied screw, and
replace the protection plate (7). Insert
your phone into the holder, and press
the clamps at the sides of the holder
ENGLISH