What To Do If - Electrolux EHS 36020 U User Manual

Ceramic glass hob
Hide thumbs Also See for EHS 36020 U:
Table of Contents

Advertisement

26 electrolux what to do if ...

What to do if ...

Problem
The cooking zones will not
switch on or are not function-
ing
The residual heat indicator is
not displaying anything
The automatic warm-up func-
tion is not switching on
e
and number are displayed
If you are unable to remedy the
problem by following the above
suggestions, please contact your
dealer or the Customer Care De-
partment.
Possible cause
More than 10 seconds have
passed since the appliance
was switched on
The child safety device is
switched on l
Several sensor fields were
touched at the same time
The sensor fields are partly
covered by a damp cloth or
with liquid
Automatic switch off has been
triggered
The cooking zone was only on
for a short time and is therefore
not hot
The highest heat setting is set
Ç
Electronics fault
Remedy
Switch the appliance on again.
Deactivate the child safety de-
vice (See the section "Child
safety device")
Only touch one sensor field
Remove the cloth or the liquid.
Switch the appliance on again.
Switch the appliance on again
If the cooking zone is sup-
posed to be hot, call the Cus-
tomer Service Department.
The highest heat setting has
the same power as the auto-
matic warm-up function
Disconnect the appliance from
the electrical supply for a few
minutes (Take the fuse out of
the house's wiring system)
If after switching on again,
is displayed again, call the
customer service department
e

Advertisement

Table of Contents
loading

Table of Contents