Preparation For Use; Unpacking And Setup - Emerson NR303TTC Owner's Manual

PREPARATION FOR USE

UNPACKING AND SET UP
Carefully remove the unit from the display carton and remove all packing
material from the unit.
Unwind the AC power cord and extend it to its full length.
Unwind the FM Antenna wire and extend it to its full length.
Place the unit on a stable, level surface, convenient to an AC outlet, out of
direct sunlight, and away from sources of excess heat, dust, moisture, humidity,
or strong magnetic fields.
Connect the plug to your AC outlet.
Raise the lid to expose the phonograph. The phonograph has been secured
for shipment with a transit screw. Use a coin or screwdriver to turn the transit
,,
,,
screw clockwise. This will allow the turntable to float .
TRANSIT SCREW
5