Programmed Playback; Repeat Function - Emerson MS9923TT Owner's Manual

After all your desired tracks are programmed you may press the "MEMORY" button
to reconfirm that the information has been stored correctly. The display will show
you which disc and track number you have entered into program memory
Number 1. Each time you push the "MEMORY" button the display will show you
which disc number and track number is stored in each successive memory location.

PROGRAMMED PLAYBACK

After you have stored and confirmed the program information, press the
PLAY/PAUSE button to begin programmed playback. Playback will start at the
first disc and track which you have programmed and will continue until all
programmed discs and tracks (up to a total of 40) have been played.
NOTE: If you press the
player will skip forward or back to the next track and disc which you have
programmed, not the next track on the disc which is being played.
TO CLEAR THE PROGRAM MEMORY
If the disc is playing, press the STOP
STOP button again to clear the program memory. .

REPEAT FUNCTION

This system has a four-way repeat function which allows you to continuously repeat
one track, one disc, all discs, or all of the tracks which you have programmed.
1.) ONE TRACK REPEAT
• Press the "REPEAT" button until the
display.
• Use the "SKIP" buttons (and the "CD/DISC SKIP" button, if necessary) to
select the exact track that you wish to repeat.
• Press the PLAY/PAUSE
track will begin playing. It will repeat continuously until
cancelled.
MS9923TT_ib_0416.p65
or Skip buttons during programmed playback, the
button to stop the discs. Then press the
REPEAT
Indicator appears in the CD
ONE
button to begin one track repeat. The selected
14
14
f u n c t i o n i s
REPEAT
ONE
16/4/2002, 14:17