Getting Started; Handling The Hard Drive - Maxtor STM3250620A - DiamondMax 250 GB Hard Drive Installation Manual

MAXTOR ATA HARD DRIVE INSTALLATION GUIDE
FIGURE 1 INCLUDED IN THIS KIT
1.
Maxtor ATA Hard Drive
2.
Ultra ATA Interface Cable
3.
Driver CD or Diskette
4.
Mounting Screws
Max•Blast
™
Introduction
Thank you for selecting a Maxtor hard drive storage product. This installation
guide will lead you through the installation of your hard drive.
The Maxtor Hard Drive Kit includes the components shown in Figure 1. Your
computer may need some or all of these parts to complete the installation.
You will also need the tools shown in Figure 2 on page 3
of your operating system to install the hard drive in your computer.

Handling the Hard Drive

Your hard drive should be handled with care during unpacking and installation.
Damage to hard drives is typically caused by rough handling, shock, vibration,
or electrostatic discharge (ESD). Be aware of the following precautions when
unpacking and handling your hard drive:
– Save the packing materials in case you need to return your hard drive.
– Allow the hard drive to reach room temperature before opening the anti-
static bag.
– Handle the hard drive by its sides. Do not touch the circuit board
electronics on the bottom of the hard drive.
– Do not connect or disconnect any hard drive cables when the system is
powered on.
– Do not drop, jar, or bump the hard drive.
including a full version
PAGE 2