MAXTOR ATA HARD DRIVE INSTALLATION GUIDE
Existing System with Two ATAPI (CD/DVD/Zip) Drives
(See Figure 10 and "Installing an Additional Storage Drive or Replacement Boot
Drive (Windows 98, Me, 2000, XP)" on page 19.)
Cable Position
Primary Master, 0:
Primary Slave, 1:
Secondary Master, 0:
Secondary Slave, 1:
Existing System with Single ATAPI (CD/DVD/Zip) Drive and Previously
Installed Additional Storage Device
(See Figure 10 and "Installing an Additional Storage Drive or Replacement Boot
Drive (Windows 98, Me, 2000, XP)" on page 19.)
Cable Position
Primary Master, 0:
Primary Slave, 1:
Secondary Master, 0:
Secondary Slave, 1:
PAGE 11
Device
Boot Drive
Additional Storage Drive (New Maxtor Drive)
CD/DVD Drive #1
CD/DVD Drive #2
Device
Boot Drive
Additional Storage Drive (Previously Installed)
Additional Storage Drive (New Maxtor Drive)
CD/DVD Drive