Warranty Registration Information - Maxtor STM3250620A - DiamondMax 250 GB Hard Drive Installation Manual

Ata/100 internal hard drive
Hide thumbs Also See for STM3250620A - Maxtor DiamondMax 250 GB Hard Drive:
Table of Contents

Advertisement

MAXTOR ATA HARD DRIVE INSTALLATION GUIDE

Warranty Registration Information

Before installing the hard drive, please write down the serial number and the model number information.
If you ever need to contact Maxtor Support, you must provide this information about your hard drive prior to assistance.
Several hard drive models are illustrated below to help you identify where these numbers are located. Use the drawing that looks
like your hard drive, then locate the model and serial numbers from your hard drive and write these numbers in the space provided.
Serial
Number
Model
Number
Model Number __________________________________
PAGE 1
Serial
Number
Model
Number
Serial Number (S/N) __________________________________
Serial
Number
D iamond M ax XX
S/N: XXXXXXXX
Model
Number
XXXXXXXXXX
P/N: XXXXXX-XXX
Firmware: X.XXX
Date Code: XXXXX Site Code: XX
Caution. Product warranty is void if any seal
or label is removed, or if the drive experiences
shock in excess of 350 Gs.
For Technical Support and Regional Contact
information, please visit www.maxtor.com
I nstallation S ummary
For easy installation use MaxBlast software, available at www.maxtor.com.
Use an 80-conductor Ultra ATA cable with this drive to achieve the best performance.
1. Set the jumper to Cable Select if using an Ultra ATA cable, cable position determines
Master (black connector) or Slave (gray).
2. Mount the drive using two screws per side.
Do not over tighten the screws.
3. Install the power and data cables.
4. Run your computer BIOS/system setup program.
Select the Auto-detect option and enable Logical
Block Addressing (LBA). Save and Exit the setup
program.
5. Prepare the drive for use with your Operating System. See your OS instructions for
details. Be careful to select the correct drive. Always backup critical data before
®
making changes. Windows XP or 2000 prepares the drive during installation.
®
Windows ME or 98 uses FDISK and Format commands. Macintosh uses Disk Utility
in the utilities folder.
M anufactured by S eagate T echnology I nternational
3.5 S eries 7200. xx
*One Gbyte equals one billion bytes when referring to hard drive capacity.
Accessible capacity may vary depending on operating environment and formatting.
E106814
XXXXXXX
XXX GB* PATA
+5V x.xx A
+12V x.xx A
Product of Singapore
XXX-XXXXX (X)
Master = ON
Slave
= OFF
Cable select
P roduct of xxxxxx , xxxxxx
N176
D33027

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stm3250620a 250

Table of Contents