Dukane DPC II Plus User Manual page 3

DPC II Plus & EZ Welder Manual Revision History
Revision Revision
Number History
–00 Add information for EZ–Series Generator to DPC II Plus Manual.
Added EZ Welder™ Key Features to Section 1.
Table 3—1 references new DPC II Plus/EZ Welder manual.
Figure 4–1B shows EZ Generator w/o Hot Key for P2.
Figure 4–8B added to show current software revision for
EZ Generator. Figure 4–8A shows DPC II Plus version.
Figure 5–1 notes Multi–Probe modules are for DPC II Plus only.
Added note that photo on page 49 does not apply to EZ system.
Added note to Figure 7–30 that P2 branch is for DPC II Plus
systems only. EZ Series are single pressure.
Updated Dukane's telephone numbers on pages 143–144.
Added Table 15—II for EZ Generator Part Number.
–01 Modify Table 5—V on page 48 (Pin 9 is +22V DC)
Clarify AFTERBURST option bypass on page 73 and 80.
Emergency Stop Switch Interface Diagram on page 25
New consolidated warranty.
Dukane Corporation •
Dukane Manual Part No. 403-566-01
• Ultrasonics Division
Table of Contents
Date
2003–Sept–25
2004–Dec–07
iii