To enter or exit Valet
1.
Turn the ignition on.
2.
Turn the ignition off.
3.
Press and release the Valet
switch within 10 seconds.
The status LED will light steadily to indicate that you have entered
Valet
®
Mode and will turn off when you have exited Valet
Remote Valet
You can also activate Valet
1.
Open any vehicle door.
2.
Press
.
3.
Press
.
4.
Press
again.
The status LED will light solid if you are entering Valet
will turn off if you are exiting Valet
Remote Start
The remote start feature allows you to remotely start and run your
vehicle for a programmable period of time. This makes it possible
to warm up the engine, as well as adjust the interior temperature
of the vehicle with the climate control system. If interior heating
or cooling is desired, the climate controls must be preset, and the
fan blower must be set to the desired level prior to remote starting
the vehicle.
14
®
Mode:
®
®
Mode using the remote transmitter:
®
Mode.
1999 Directed Electronics, Inc.
©
DRW-35
®
Mode.
®
Mode and