Playing Cassette Tapes - Emerson CD Cruiser PD6528 Owner's Manual

PD6528 O/M.QXD 1/16/01

PLAYING CASSETTE TAPES

1
Set the VOLUME Control to a low
setting.
4
Open surface side
Emptiest reel
Insert a pre-recorded cassette into
the slots in the Cassette Door with
the open end facing up and the full
reel on the right side. Close the
cassette door.
7
To pause playback momentarily,
press the cassette Pause (
Button. The tape movement stops
but the tape motor is still running.
Press the cassette Pause ( )
Button again to release Pause
and resume normal playback.
3:50 PM Page 10
2
Slide the FUNCTION Switch to
the TAPE position.
5
3
Press the cassette Play (➛)
Button
Adjust the VOLUME
STEREO-WIDE
desired.
8
To stop playback before the tape
) ends, press the Stop/Eject (
Button, The PLAY Button is
released and the tape motor
shuts off.
3
Open the Cassette Control Cover
to expose the cassette controls
and press the Stop/Eject (
Button to open the Cassette Door.
6
2
1
To advance or rewind the tape
to begin playback. rapidly, press either the cassette
Fast Forward (➛➛)
and
Controls as
(❿❿)
the desired point, press the
cassette Play (➛) Button
resume normal playback.
9
When the tape reaches the end,
the
)
activates, the tape PLAY Button is
released and the tape motor
shuts off. Press the Stop/Eject
(
Cassette Door and remove the
tape.
10
2
3
1
or Rewind
buttons. When you reach
auto-stop mechanism
) Button to open the
)
to