Playing Cassette Tapes - Emerson PD9814 Owner's Manual

Playing Cassette Tapes

1.) Open the cassette door by pressing the
2.) Place a pre-recorded cassette tape with the exposed tape facing down and the
full reel on the left side.
3.) Move the FUNCTION selector to the TAPE-OFF position.
4.) Press the cassette
5.) Set the VOLUME and BASS BOOST controls as desired.
6.) To advance the tape rapidly press the
ends press the
7.) To rewind the tape rapidly press the
ends press the
8.) When the tape ends the Automatic Stop System releases the
shuts off the tape motor. You may then open the cassette door, remove your
tape, turn it over and play the other side if desired.
9.) When you are finished listening stop the tape, open the door, remove the tape
and close the door.
If you are playing a tape and then switch to the RADIO or CD function be sure
to press the Stop/Eject key to disengage the tape mechanism. This prevents
excess wear and tear on the mechanism.
PD9814_053105.p65
Play key to begin playback.
F.Fwd key. To stop the tape before it
Stop/Eject key. .
Rewind key. To stop the tape before it
Stop/Eject key. .
17
17
Stop/Eject key. .
Play key and
31/5/2005, 10:31