Pc Gui Installation; System Requirements; Install; Basic Operation - dbx DriveRack 260 User Manual

Complete equalization & loudspeaker management system
Hide thumbs Also See for DriveRack 260:
Table of Contents

Advertisement

SECTION 6

6.1.1 PC GUI Installation

50
DriveRack™ User Manual
Remote Control
To make operation of the DriveWare™ units even more convenient, dbx professional prod-
ucts includes the option of using the DriveRack PC GUI software (included) and the ZC-
Remote Controllers (optional).
regarding the utilization of the DriveWare software including: install, system requirements,
cable specifications and basic operation and basic setup for ZC-Remote Controller applica-
tions.

SYSTEM REQUIREMENTS

Min. system- 266mhz PC processor - 16 bit color monitor - 64 meg RAM - Windows™ 95
OS R2 or newer - Windows™ NT 4.0 or newer - Baud rate (fixed) 38.4 kbaud
Note- COMM port setting must be consistent. This means that when the GUI is in use, any
other device that uses the RS232 COMM port must be turned off.

INSTALL

• Install the DriveRack™ GUI interface from either the dbx Professional Products website at:
www.dbxpro.com or from the CD ROM onto your your PC or laptop.
• Once the software is downloaded or CD is loaded, double click on the file named:
DriveRack™ setup.
• The application will proceed to ask you where you want the program installed.
• Once the software installation has been completed, it is recommended that you restart
your computer.
• Make all network device connections prior to running the GUI interface.
The following information offers basic operation information of the DriveRack™ GUI interface

BASIC OPERATION

Once the unit has been connected, boot up the GUI Interface by double-clicking on the
application icon. When the program opens, the first view you will see will be the UNIT
view if the unit is not connected to the PC. This view has icon representations of the unit
being used, double-click on the unit to access and edit.
If the unit is connected to the PC, the program will boot up with a block diagram of the unit.
To edit modules, double-click on the desired module block.
• To adjust the utility menu, Right-Click-hold on the top bar of the window to pull down the
utility menu.
The following section contains some basic information
DriveRack
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents