DriveRack
From program mode, press the Delay button. Pressing the Data Wheel will select the effect parameter to be edited.
Successive Presses of the Delay button will move you through pre and post crossover delays.
From program mode, press the UTILITY button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG
NEXT PG>
Noise gate-
Limiter
AGC-
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
®
™
DELAY
Delay - On/Off
Length - Delay Time - Course, Fine
Units - Seconds,Feet,Meters
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Pressing and holding the Utility button will enter you into the meter mennu
UTILITY
LCD Contrast 1-16
AEQ Plot - RTA/GEQ
260 Device Level-
Low, Med, High
Output Jumpers -
Setting - 14, 22, 30dB
1-3
Limiter 4-6
Zone Controller-
1-3
Editing Functions
2.7 Navigating the Delay Section
2.8 Navigating the Utility/Meters Section
PUP Prog. - Current/Stored
PUP Mute - Current/Stored
Edit High Password
Edit Medium Password
1-6
Zone Controller-
Output Trims
4-6
1-3
DriveRack™ User Manual
Section 2
ZC Panel -
1-6
Security Level - Module Select
(Store) -
Edit Panel
Security Level- Low, Med, High
Program List Size- 1-10
Program Change mode
List Index -
1-10
Normal/Program
Program Number Lock 1-25
Output Trims
4-6
DELAY
UTILITY
METERS
17