Section 2
2.9 Navigating the Wizard Section
From program mode, press the RTA/WIZARD button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG
NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
RTA/WIZARD
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
2.10 Navigating the I/O Section
From program mode, press the I/O button. Pressing the Data Wheel will select the effect parameter to be edited.
<PREV PG
NEXT PG>
The NEXT and PREV
buttons scroll through
the pages of selected module.
18
DriveRack™ User Manual
Editing Functions
SYSTEM SETUP
GEQ Setup-Dual Mono
Insert 1 Setup-
or Stereo Linked
Select
Amp Select-
Amp Sensitivity-
High, Mid, Low
High, Mid, Low
See list
AUTO EQ WIZARD
Connect Mic
Pink Noise Level
-Inf to 20dB
AFS WIZARD
Mixer gain turn
Select Number of
down prompt
Fixed Filters
- 0-12
FEEDBACK
Input Level 1 -Inf to 20dB
Input Level 2 -Inf to 20dB
Master Level -Inf to 20dB
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Main Speaker Select-
Insert 2 Setup-
See list
Select
Amp Level
Low Amp
Load New
High, Mid, Low
Bridged/
Program-
Normal-
Auto EQ - L
Auto EQ - R
Select Type -
Mixer Gain Adjust-
Low, Med, High mode
Pink Noise On/Off
Pink Noise Level -10 to 10dB
DriveRack
WIZARD
Sub Speaker Select-
See list
Auto EQ - L-R
Left and Right when using
Linked Graphic EQ
Fixed Filter Setup
Done-
I/O Section
Output Channel 1-6 On/Off
Polarity +/-
Phase -180 to 0
®
™