dbx DriveRack 260 User Manual page 16

Section 1
• Once you have completed your amp level settings, you will press the <NEXT PG> button,
• Once have made a bridged or mono selection, press the <NEXT PG> where the unit will
Auto EQ WIZARD
• Once you have custom-tailored your system setup, you can now proceed to EQ your system.
• Either press the <NEXT PG> button or rotate the <DATA> wheel
• You can now select any one of the several different Frequency responses for the Auto EQ.
• You will now proceed to "Pink" the room by adjusting the Pink level. The range of bar graph
8
Getting Started
where you will be asked to select a bridged or normal setting fro your low amp (if used).
The display will appear as follows:
prompt <DATA> wheel to load your new settings. If you do not wish to load the settings
either press the <PROGRAM> button or use the <PREV PG> button to re-edit your settings,
By using your selections, the DriveRack™ will automatically generate a new program and
speaker selection which are used to choose the correct crossover type, parameters, speaker
compensation EQ and delay are also adjusted by the speaker selection. Amplifier parameters
are used to set the limiters to stop amplifier clipping and balance out the crossover levels.
You may find that you want to re-adjust the crossover levels based on your taste and type of
music.
The Auto EQ Wizard automatically adjusts the response of the system by producing pink
noise and adjusting the Graphic EQ until the RTA matches a selected response. From the
260 DriveRack Wizard menu, rotate the <DATA> wheel until the display appears as follows:
DriveRack 260 Wizard
System Setup
Auto EQ Wizard
AFS WIZARD
and the display will read:
A
E
u
Q
t
o
RESPONSE
The options are: Flat (0), and Response A-D, and Low, Medium and High Precision. Once
you have selected your desired EQ Frequency response, press the <NEXT PG> button and
the display will appear as follows:
Auto EQ
Mic Level
Turn Up Level
Pink Level > 18dB
is -30dBu to +20dBu. Connect an RTA-specific microphone to the rear-panel RTA mic input.
C PRECISION LOW
: Pink Noise
DriveRack
®
™