Navigating The Pre-Eq Section; Navigating The Crossover Section - dbx DriveRack 260 User Manual

Complete equalization & loudspeaker management system
Hide thumbs Also See for DriveRack 260:
Table of Contents

Advertisement

DriveRack
STORE(Delete) - The store button is used to store program edits.When pressed
and held, the 260 will enter the PROGRAM DELETE module.
RTA (Wizard) -
DriveRack Wizard setup menu which includes: System Setup, Auto EQ setup and
AFS Wizard.
To edit the parameters of the EQs used in a selected program, simply use the following procedure. From program mode,
press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button will move through each channel.
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
EQ
The EQ button
toggles through
the EQs used in
EQ
each channel of
the selected
program
menu.
To edit the parameters of the Crossover used in a selected program, simply use the following procedure. From program mode,
press the X-OVER button. Once you have reached the Crossover module, Navigate through the Pages of the selected Crossover
module by pressing the "Next Page" or "Prev Page" buttons successively until arriving at the desired Page.
The XOVER button
toggles through
the XOVER used in
each channel of
the selected
program
menu.
®
This enters the RTA mode, or when held, enters the 260
2.3 Navigating the EQ Section (28-GEQ and PEQ)
GEQ
Freq- 31.5Hz-18kHz
On/Off
GEQ
Flatten/Restore
Gain -12dB to12dB
or
PEQ On/Off
PEQ
Flatten/Restore
Bell,HSelf, LShelf, LHShelf,
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Low Pass
XOVER
Freq- 19.7kHz to Out
Slope - BS, BW, LR
(6,12,18,24,36,48)
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
Editing Functions
B1 Freq- 20Hz-20kHz
B2 Freq- 20Hz-20kHz
Gain -12dB to12dB
Gain -12dB to12dB
Q .20 to 16.0
Q .20 to 16.0
2.4 Navigating the XOVER Section
High Pass
Freq- 20.kHz to Out
Gain- -20 to 20dB
Repeat, for each crossover band
Slope - BS, BW, LR
(6,12,18,24,36,48)
DriveRack™ User Manual
Section 2
GEQ/PEQ
B2 Freq- 20Hz-20kHz
...
Gain -12dB to12dB
Q .20 to 16.0
XOVER
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents