Use different settings for high-risk processes
Before you can define high-risk processes, you must specify that you want to use
different settings for low-risk and high-risk processes:
In the upper details pane under
1
Processes Policies
In the lower details pane, select the
1
Figure 1-13. Default Processes Policies — Processes tab
Deselect
.
2
Inherit
Select
3
Use different settings for high-risk and low-risk processes
Click
to save these settings.
Apply
4
VirusScan for NetApp 7.1
.
Processes
Setting policies for the product
, select
Default
tab.
.
Configuration Guide
29