Setting Policies For Default Processes - McAfee NAPCKE-AB-AA - VirusScan For NetApp Configuration Manual

Configuring VirusScan for NetApp 7.1.0

Setting policies for default processes

These are the default processes for on-access scanning which are defined as any
processes that are not specified as low-risk or high-risk. See the VirusScan for
NetApp 7.1.0 Product Guide for information about assigning risk to a process.
Policies can be configured on these tabs:
®
18 VirusScan for NetApp
Processes tab on page
Detection tab on page
Advanced tab on page
Actions tab on page 22.
®
software version 7.1.0
19.
20.
21.