Setting policies for low-risk processes
These policies apply to processes specified as having a lower risk of infection, and
are used during an on-access scan. For information about assigning risk to a
process, see the VirusScan for NetApp 7.1.0 Product Guide.
The options on these tabs affect processes specified as low-risk on the
tab. The
names under
For more information about configuring these options, see the VirusScan for
NetApp 7.1.0 Product Guide.
Policies can be configured on these tabs:
,
Detection
Advanced
Default Processes Policies
Use different settings for low-risk processes on page
Processes tab for low-risk processes on page
Detection tab on page
Advanced tab on page
Actions tab on page
27.
, and
tabs are identical to the tabs of the same
Actions
.
25.
26.
27.
Setting policies for the product
Processes
24.
Configuration Guide
23