Adobe 25520388 - Premiere Pro - PC Using Manual page 48

USING ADOBE PREMIERE PRO
Workflows and setup
More Help topics
"Creating and changing projects" on page 51
"Selecting a sequence preset" on page 147
"Create a sequence" on page 142
"Create an HDV or HD sequence" on page 149
Set up an SD-SDI, HD-SDI, or component system
A B
SDI/component setup with breakout box
A. Computer and computer monitor B. (Optional) A/V breakout box C. XLR jacks and plugs for L & R audio D. RS232/422 port and
connector E. BNC jacks and plugs for Y/Pb/Pr component video, BNC jack, and plug for SDI video F. HD/SD VTR G. BNC jacks and plugs
for Y/Pb/Pr component video, BNC jack, and plug for SDI video H. RCA jacks and plugs for L (white) & R (red) audio I. Speakers J. Television
monitor
With this setup you can capture audio and video from an SD-SDI, HD-SDI, or component video device (camcorder
or VTR). You can monitor the signal on a TV monitor while editing. Finally, you can export any sequence back to the
camcorder or VTR.
This setup requires either an SDI or component PCI card installed in the computer. Alternatively, it requires an
external SDI or component device connected to the computer via FireWire. Either an internal card or an external
device would provide ports, usually with BNC connectors, capable of receiving SDI or component video signals.
Some SDI and component PCI cards come with breakout boxes which provide ports for the SDI or component signals.
Some breakout boxes also provide ports for genlock. Others provide the necessary outputs directly on the card.
Connect the SD-SDI, HD-SDI, or component device to the computer or breakout box using SDI or component
1
video cables. A single cable with BNC connectors carries SDI video, but three separate cables with BNC connectors
carry component video signals. Run video cables from the video outputs of the computer or breakout box to the
video inputs of the device. Also run video cables from the video outputs of the device to the video inputs of the
computer or breakout box.
Connect the SD-SDI, HD-SDI, or component device to the computer or breakout box using XLR audio cables. Run
2
audio cables from the audio outputs of the computer or breakout box to the audio inputs of the device. Also run
audio cables from the audio outputs of the device to the audio inputs of the computer or breakout box.
D
F
C E
Last updated 1/16/2012
I
H
J
G
43