Programming Overview; Programming Via Handheld Device - Datalogic MAGELLAN 8500 Product Reference Manual

Programming Overview

NOTE

Programming via Handheld Device

Product Reference Guide
If you experience difficulties, have questions or require additional infor-
mation, contact your local distributor, or call your dealer or sales represen-
tative.
The scanner's programmable feature settings can be modified to accom-
modate your system's unique requirements. These settings can be commu-
nicated to the scanner in one of two ways:
1. Commands can be sent directly from the host. A limited set of
host commands are available. Refer to Appendix D for more
details or contact Tech Support.
2. Programming bar code labels can also be used to modify the scan-
ner's programmable settings. This manual provides the bar code
labels and instructions necessary to configure the scanner's fea-
tures and options.
When you program the scanner using any of the methods above, the scan-
ner will store the changes until reprogrammed or returned to factory
defaults.
The scanner can also accept programming via its auxiliary port using a
handheld scanning device. Eligible handheld devices must have the ability
to transmit Code 128 function codes such as the programming bar codes
presented in this manual. Datalogic
®
QuickScan 6000 support this functionality. Handheld data format
requirements (baud rate, parity, etc.) are presented in Appendix F of this
manual. Additionally the programmable feature, Aux Port Mode, must be
set to "External Handheld Input" to allow operation.
TM
models QuickScan
®
1000 and
6-3