Your SnapGear appliance
The following items are included with your SnapGear appliance:
•
Power adapter
•
Installation CD
•
Printed Quick Install guide
•
Cabling including
o 1 normal "straight through" UTP cable (blue color).
o 1 "cross-over" UTP cable (either gray or red color). If you have the LITE+
LEDs
The front and rear panels contain LEDs indicating status. The front panel LEDs are
illustrated in the following figure and detailed in the following table.
Label
POWER/PWR
System/SYSTEM
Online/ONLINE
COM 1, 2
VPN
Introduction
or LITE2+ you will receive two straight through cables (blue color).
Figure 1.1 SnapGear SOHO+/PRO front panel LEDs
Activity
Description
On
Power is supplied to the SnapGear appliance.
Flashing
System flashes once every second when the
SnapGear appliance is operating correctly.
On
If the System LED is on and not flashing, an operating
error has occurred. In this situation, the other LEDs
form a diagnostic pattern indicating the failure.
On
Indicates a valid Internet connection is present.
Flashing
For either of the SnapGear appliance COM ports,
these LEDs indicate receive and transmit data.
On
Virtual Private Networking is enabled.
6