Table of Contents
Advertisement
Dial-in user accounts
User accounts must be set up before remote users can dial-into the SnapGear appliance.
The following figure shows the Dial-in user account creation:
The field options in Add New Account are shown in the following table:
Field
Username
Password
Confirm
Domain
Dial-in server configuration
Figure 4.2 Dial-in user account creation
Description
Username for dial-in authentication only. The name is case-
sensitive (e.g. Jimsmith is different to jimsmith).
Password for the remote dial-in user.
Re-enter the password to confirm.
If your network has a Windows NT server, you can attach a domain
name to your dial-in remote user accounts. This field is optional and
can be left blank.
42
Advertisement
Table of Contents
