Timer Recording Using Showview System - Daewoo DRV-6815 User Manual

DF-H7DD3D-FB-I(GB) 2007.7.25 2:53 PM

Timer Recording using ShowView system

Thanks to this programming system, you no longer
need to tediously enter the date, programme number,
start and end time. All the information needed by the
DVD Recorder + VCR for programming is contained in
the ShowView programming number. This ShowView
number is found in most TV listings.
1 Insert recordable media such as DVD±R,
DVD±RW, recordable VHS tape.
2 Press [TIMER].
The 'Timer Recording' menu appears.
3 Select 'ShowVIew' with
with [ENTER].
The 'ShowVIew' menu appears.
Enter the entire 'ShowView' number. This number
is up to 9 digits long and can be found next to the
start time of the TV programme in your TV listings
magazine.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the 'ShowView' number.
If you make a mistake, you can clear it with [œ].
You can also select Target, Quality and Repeat
by using [œ √]. To change status of each item,
use [...†].
4 Press [ENTER] to confirm.
5 The decoded information appears after
confirmation. You can go back at any time to
change the information by pressing [ENTER] and
select 'Edit' on the menu as explained above.
Select the appropriate input field using [...†]. If
required, change the information using [...†].
If all the information is correct, press the [ENTER]
button. The programming information is stored in
a TIMER block.
˘ ` 49 mac001
Timer Recording
Timer Recording
†
Showview
†
...
Move
†
ENTER Confirm TIMER Exit
6
[.../†] and confirm
7
Timer Recording
Target Quality Repeat
DVD SP Once
†
ShowView No. 523_ _ _ _ _ _
†
...
Move
†
Confirm Exit
ENTER TIMER
1200DPI 100LPI
Timer Recording
Timer Recording List
Target Date Start Stop
DVD 28/11 Tue 13:20 14:13
...
Move
†
ENTER Confirm MENU Back
Timer Recording List
Target Date Start Stop
DVD 28/11 Tue 13:20 14:13
DVD 28/11 Tue 14:20 18:05
- - - - -/- - --- - -:- - - -:- -
...
Move
†
Confirm Back
ENTER MENU
Press [TIMER] to exit the Timer Record List.
Timer indicator will light or start blinking. You
must power off the DVD Recorder + VCR to
start the Timer Recording.
ShowView is not available for some countries.
1/1 28/11/2010 13:09:33
PR No. Quality Repeat
PR2 SP Once
TIMER Exit
1/1 28/11/2010 13:09:33
PR No. Quality Repeat
PR2 SP Once
PR3 HQ Once
Edit
- - - - - - - - -
Delete
Disable
Cancel
Exit
TIMER
49