Connecting Peripheral Sources And Outputs - Smart Technologies SMART Board 400iv Configuration And User's Manual

C H A P T E R 4
Integrating other devices
Signal format Aspect ratio
480i (DVD player) 4:3
(640 × 480)
567i (DVD player) 5:4
(720 × 576)
720p 16:9
720p 16:9
1080i 16:9
1080i 16:9
Video system signal compatibility
The following table lists the projector's video system signal compatibility, particularly for signals
delivered over S-Video and Composite video connectors, which you can adjust by using the aspect
ratio commands described in Default menu on page 13.
N
N O T E
The 16:9 command delivers all video modes with black bands along the top and bottom edges of
the screen. The Match Input command could deliver video modes with blank bands along the top
and bottom edges of the screen, depending on the input resolution.
Video mode Aspect ratio
NTSC 4:3
PAL 4:3
SECAM 4:3

Connecting peripheral sources and outputs

Follow these instructions if you have a peripheral device to connect to your interactive whiteboard
system for a short time, such as a DVD/Blu-ray player.
N
N O T E
Measure the distance between the projector and the peripheral device you want to connect. Make
sure each cable is long enough, has plenty of slack and can be placed safely in your room without
presenting a trip hazard.
23
Horizontal Vertical
frequency (kHz) frequency (Hz)
15.73 59.94
15.63 50
44.96 59.94
35 50
33.7 59.94
28.1 50
Horizontal Vertical
frequency (kHz) frequency (Hz)
15.73 29.96
15.62 25
15.62 25
"Match Input"
appearance
Full screen
Letterbox
Letterbox
Letterbox
Letterbox
Letterbox
Color signal
(MHz)
3.58
4.43
4.25 (f )
ob
4.06 (f )
or