Introduction; Front View - RCA RLED3218A Instruction Manual

Introduction

1. Front View

Led Indicator
1). (IR) Infrared Receiver: Receives IR signals from the remote control.
(Power on/Standby)LED Indicator: Press POWER to turn on and off.
Indicator on(Red)
Indicator on(Green)
The effective receiving range for the signal is 5-8 metres from the front of the remote
control window, and 30
window.
2). The functions of the buttons:
INPUT: Press to display the input source menu.
MENU: Press to display the OSD menu,
press again to exit the menu.
CH+/-: Press to scan through channels.
VOL+/-: Press to adjust the volume.
POWER: Turn on/standby the TV set.
Remote Control window (Keep clear)
Standby mode
Power on mode
0
to the left or right side and 20
Press INPUT button on the TV set or remote control to
display the input source menu, and use CH+/- button on
the TV set or
input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.
Introduction
0
above or below the remote control
/ button on remote control to select the
5
TV
AV
Component
HDMI1
HDMI2
HDMI3
VGA