Reset Latched Alarms - Liebert Liqui-tect MC68HC16Z1 User Manual

6.9

Reset Latched Alarms

The Reset Latched Alarms menu allows you to clear any leak or fault
alarms that have been defined as latched.
To clear latched alarms:
Log In and Choose Reset Latched Alarm
• From the Main Menu, use the arrows
Control, then press Enter
• Enter your password at the Login screen.
• From the System and Control Menu, use the arrows
Reset Latched Alarm, then press Enter .
Choose Y to Reset Alarms
• From the Reset Latched Alarms Menu, use the arrows
choose Y (Yes - reset all latched alarms) or N (No - do not reset
alarms).
(If no alarms have been set up as latched, the screen displays a
message, as shown below right.)
• Press Enter .
This is the only way to reset latched alarms. This step is required to
return latched points to their normal state. (To set up digital alarm
outputs as latched, see 6.5.3 - Define Alarms as Latched or
Unlatched.)
to choose System and
(see 6.1 - Login for help)
37
System and Control Options
Main Menu
VIEW STATUS
> SYSTEM AND CONTROL
=NEXT
Login
LOGIN
AAAA
to choose
=SELECT
System & Control Menu
to
SETUP SYSTEM
> RESET LATCHED ALARM
CLEAR ALARM HISTORY
=NEXT
CLEAR ZONE TREND
Reset Latched Alarms
RESET LEAK & FAULT
LATCHED ALARMS? Y
=Y/N
Message if No Latched
Alarms
ALARMS ARE NOT SET
FOR LATCHING
=SELECT
=NEXT/END
=SELECT
=END
ESC=EXIT