Sioux Tools 5055AM6 Operator Instructions Manual

Form # Z367A
Model 5055N5055AM6
Date 2-02/A
Mini Die Grinders
-
Right Angle Head
lmpofiant
Read these instructions carefully before installing, operating,
servicing or repairing this tool. Keep these instructions in a safe
accessible place.
Operator Instructions
fncludes
-
Foreseen Use, Work Stations, Putting Into Se,wice,
Operatina Disrnantlin~, Assembly and Safety Rules.
Sioux Tools, lnc.
11 7 Levi Drive
Murphy, NC 28906
U.S.A.
Tel No. 828-835-9765 Fax No. 828-835-9685
Personal Safety Equtpment
a
Always Read tnstruct+ons
Before
Us~ng Power Twis
Use
-
Safety Gfasses YES
1
@ Always Wear Safety
Use
-
Safety Gloves
YES
Goggles
Product Net Weight
1-10
lbs
0.50 Kg
Recommended Use
Of
Balancer
Or
Support
N O
arrange for service and repair. If it is
not practical to remove tool from
service, then shut off the air supply
to the toot and write or have written a
warning note and attach it to the tool.
- If tool is to be used with a balancer or
other suspension device, ensure that
the tool is firmly attached to the
Air
Pressure
Recommendedworking 6.2
bar
90
PSI
Maximum
6.2 bar 90 PSI
Use
-
Safety Boots
Use
-
Breathing Masks YES
Use
-
Ear Protectors YES
suspension/support device.
-
When operating the tool, always keep
the body and particularly the hands
@
Wear Hearlng Protect~on
A
~ ~ ~ ~ ~ ~ g e d
Ewsufe
away from the working attachment
fixed to the tool.
Safety rules when using 5055Al
5055AM6 Die Grinders
-
Use accessories rated at least 20,OOORPM.
-
Prolonged exposure to vibration may cause injury.
-Read all instructions before using this tool. All
operators must be fully trained in its use and aware of
these safety rules.
-
Do not exceed the maximum working air pressure.
- Use persona[ protection equipment as recommended.
-
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains
chemicals known to cause cancer, birth defects and other
reproductive harm.
-Use only compressed air at the recommended
conditions.
-If the tool appears to malfunction,
remove from use immediatelv and
7
Product Type
RPM
Mini Die Grinders
-
Cvcies I%{ MI^
Right Angle Head
5055A
-
1/4"
5055AM6
a
6
mm
Test Method:
Tested in accordance with Pneurop
test code PN8NTCl and I S 0 Standard 3744
Recommended Hose Bore
Size
-
Minimbm
I14
ins
8
rnm
Vibration Level
2.5
Meters
i See2
Recommended Max.
Hose Length
30 Ft
10
M
Test Method:
Tested in accordance with IS0
standards 8662 Parts 1 & 17
Noise Level:
Sound Pressure Level 93.0 dB(A)
Sound Power Level 104.0 dB(A)
-
The tool is not electrically insulated. Never use the tool
if there is any chance of coming into contact with live
electricity.
-
Always when using the toot, adopt a firm footing and/or
position and grip the tool sufficiently only to overcome
any reaction forces that may result from the tool doing
work. Do not overgrip.
-Use only correct spare parts for maintenance and
repair. Do not improvise or make temporary repairs.
Major servicing and repairs should only be carried out
by persons t r a i n ~ d to do so.
-
Do not lock, tape, wire, etc. the 'On/OfY valve in 'On'
position. The triggerllever, etc. must always be free to
return to the 'Off' position when released.
-Always shut off the air supply to the tool and press the
Al l P i p e
And
Fittings
Should Be
1 1 T O r
Large
with
Suflicient
Capacity
To Maintain Recommended
Working Pressure
At
Recommended Air Supply System
Figure
1
Page No
1