Culligan Silver Series Owner's Manual page 21

Performance Data Sheet
Culligan knows the more informed you are about your water treatment systems, the more confident you
will be about its performance. It's because of this and more than sixty years of commitment to customer
satisfaction that Culligan is providing this Performance Data Sheet to its customers.
IMPORTANT NOTICE: Read this Performance Data Sheet and compare the capabilities of this unit with your
actual water treatment needs. It is recommended that before purchasing a water treatment unit, you have your
water supply tested to determine your actual water treatment needs.
MANUFACTURER:
Culligan International Company,
One Culligan Parkway, Northbrook, IL 60062-6209 USA
(847) 205-6000
PRODUCT: Culligan Silver Series
USEPA SDWA
Substance MCL
Barium 2 mg/L
Radium 226/228 5 pCi/L
TESTING CONDITIONS & RESULTS:
Flow Rate: 7.5 gpm
Pressure: 30 - 40 psi
Acidity: Non-Corrosive
Temperature: 68° (20°C)
SOFTENER SPECIFICATIONS:
Maximum Flow Rate: 7.5 gpm (28 Lpm)
Pressure Drop at Maximum Flow Rate: 13 psi (90 kPa)
Operating Temperature Range: 33 - 120°F (1 - 50°C)
Maximum Drain Flow Rate: 3.5 gpm (13 Lpm)
Working Pressure Range: : : : : 20 - 120 psi (140 - 860 kPa)
Operat Operat Operating Pressure Range (Canada): Operat Operat ing Pressure Range (Canada): ing Pressure Range (Canada): 20 - 90 psi (140 - 620 kPa) ing Pressure Range (Canada): ing Pressure Range (Canada):
The Culligan Silver Series Water Softeners are tested and validated by WQA and certified by UL against
ANSI/NSF Standard 44 for the effective reduction of calcium and magnesium (hardness) along with
Barium and Radium 226/228*.
Refer to the Specifications, Familiarization and Warranty section of this Owner's Guide for more specific
product information. To avoid contamination from improper handling and installation, your system
should only be installed and serviced by your Culligan Man. Performance will vary based on local water
conditions. The substances reduced by this system are not necessarily in your water.
Culligan water softeners are designed to work with any salt of good quality, although it is recommended
that you ask your local Culligan Man for his suggestion on the best type and grade of salt to use in this
softener.
NOTICE: This softener is not intended to be used for treating water that is microbiologically unsafe or of
unknown quality without adequate disinfection before or after the system.
*Verified utilizing hardness surrogate per ANSI/NSF Standard 44.
Buyer Signature _____________________________________________
Seller Signature _____________________________________________
12" Water Softener
™
SUBST SUBST ANCE REDUCTION ANCE REDUCTION
SUBST SUBSTANCE REDUCTION SUBST ANCE REDUCTION ANCE REDUCTION
Reduction
80%
80%
Capacity: 24,100 grains @ 6.0 lb. salt
34,500 grains @ 12.0 lb. salt
41,900 grains @ 18.0 lb. salt
pH: 7.6
Test Influent Test Effluent
Concentration Concentration
Level Level
10 mg/L 2.0 mg/L
25 pCi/L 5 pCI/L
Date __________
Date __________
ANSI/NSF 44
Water Softener
81WN
19