Using Bravia Sync With Bravia Sync Control; Bravia Sync Control - Sony BRAVIA KDL-32R420A Operating Instructions Manual

Using BRAVIA Sync with

BRAVIA Sync Control

The BRAVIA Sync Control function enables the TV to communicate with the connected equipment that
is compatible with the function, using HDMI CEC (Consumer Electronics Control). For example, by
connecting Sony equipment that is compatible with BRAVIA Sync Control (with HDMI/MHL cables), you
can control them together.
Be sure to connect the equipment correctly, and make the necessary settings.
BRAVIA Sync Control
• Automatically turns the connected equipment off when you switch the TV to standby mode using the
remote.
• Automatically turns the TV on and switches the input to the connected equipment when the
equipment starts to play (except in MHL mode).
• If you turn on a connected audio system while the TV is on, the sound output switches from the TV
speaker to the audio system.
• Adjusts the volume (2 +/–) or mutes the sound (%) of a connected audio system.
• You can operate the connected Sony equipment that has the BRAVIA Sync logo by the TV remote.
Possible operations with BRAVIA Sync buttons, see page 12.
–Refer to the instruction manual of the equipment for available control.
• If "BRAVIA Sync Control" of the TV is set to "On"
is also automatically switched to "On".
x To make the BRAVIA Sync Control settings
The BRAVIA Sync Control settings must be set on both the TV side and connected equipment side. See
"BRAVIA Sync Settings" (page 37) for the TV side settings. For settings on the connected equipment,
refer to its operating instructions.
"BRAVIA Sync Control" of the connected equipment
,
27
GB