Sony BRAVIA KDL-32R420A Operating Instructions Manual page 33

Digital Set-up
"Signal Level"
Displays the signal level for programme currently being watched.
red amber green
(weak) (average) (good)
"Programme Sorting"
Changes the order in which the channels are stored on the TV.
F f
1
Press / to select the channel you want to move to a new position, then
press .
F f
2
Press to select the new position for your channel, then press
/
"Digital Tuning"
• "Digital Auto Tuning":
Tunes in the available digital channels.
This option allows you to retune the TV after moving house, or to search for new
channels that have been launched by broadcasters. Press
• "Auto Tuning Range":
• "Normal": Searches for available channels within your region/country.
• "Full": Searches for available channels regardless of region/country.
• You can run "Digital Auto Tuning" after moving to a new residence, changing
service providers, or to search for newly launched channels.
• "Programme List Edit":
Removes any unwanted digital channels stored on the TV, and changes the order
of the digital channels stored on the TV.
F f
1
Press / to select the channel you want to remove or move to a new
position.
Press the number buttons to enter the known three-digit programme number of
the broadcast you want.
2
Remove or change the order of the digital channels as follows:
To remove the digital channel
Press . After a confirmation message appears, press
press .
To change the order of the digital channels
g F
Press , then press /
3
Press RETURN.
• "Digital Manual Tuning":
Tunes the digital channels manually.
1
Select "Scan Type", then select "Channel" or "Frequency".
2
Set the other items accordingly.
3
Select "Scan Up" or "Scan Down", then start the manual tuning.
4
When available channels are found, select "Yes" or "No".
5
Select "Yes" to store the programme. The message "Would you like to
continue scanning?" will appear on the screen. If you select "Yes", the next
channel/frequency will be scanned. If you select "No", the previous screen
is displayed.
• Digital Manual Tuning for Cable is only possible when there are digital cable
services available to user, which were found using DVB-C Full Scan.
"Subtitle Set-up"
• "Subtitle Setting": When "For Hard Of Hearing" is selected, some visual
aids may also be displayed with the subtitles (if TV channels broadcast such
information).
• "Primary Preferred Language": Selects preferred language which subtitles
are displayed in.
• "Secondary Preferred Language": Selects secondary preferred language
which subtitles are displayed in.
f
to select the new position for the channel and press
.
.
G
to select "Yes", then
G
.
(Continued)
33
GB