Set-Up - Sony BRAVIA KDL-32R420A Operating Instructions Manual

Parental Rating
External Input Lock
• Entering the correct PIN code for blocked channel or external input will temporarily deactivates the "Parental
Lock" feature. To reactivate the "Parental Lock" settings, turn off and on the TV.
z • If you lost your PIN code, see page 45.

Set-up

Photo Frame Settings
(except KDL-46R450A/
40R450A/32R400A)
Except Australian and New Zealand model: Sets an age restriction to
viewing. To view any programme rated for ages above the age you specify,
enter the correct PIN code.
Australian model and New Zealand model: Sets a parental guidance level.
Programmes that exceed the set level can only be watched after entering the
correct PIN code.
Australian model
Level Function
Block All All programmes need a password to view.
G and above To lock "General" and above programmes.
PG and above To lock "Parental Guidance" and above programmes.
M and above To lock "Mature" and above programmes.
MA and above To lock "Mature Adult" and above programmes.
AV and above To lock "Adult/Violence" and above programmes.
R and above To lock "Restricted" and above programmes.
No block No programmes need a password to view.
New Zealand model
Level Function
Block All All programmes need a password to view.
G and above To lock "General" and above programmes.
PGR and above To lock "Parental Guidance Recommended" and above
programmes.
AO and above To lock "Adults Only" and above programmes.
No block No programmes need a password to view.
Locks an external input from being watched.
To view a blocked external input, select "Unblocked".
"Display Mode"
Allows you to select the display mode. Select from "Image and Clock", "Full
Screen Image" and "Full Screen Clock". See page 24.
"Clock Display"
Allows you to select the clock display. Select from "Calendar", "Analogue
Clock", "Digital Clock", "Calendar and Clock" and "Clock".
When the "Display Mode" setting is set to "Image and Clock", you can set to
"Calendar", "Analogue Clock" or "Digital Clock". When the "Display Mode"
setting is set to "Full Screen Clock", you can set to "Calendar", "Calendar and
Clock" or "Clock".
"Calendar and Clock" and "Clock" can be displayed only when "Display Mode"
is "Full Screen Clock".
(Continued)
35
GB