Overview Of The Tv Buttons And Indicators - Sony BRAVIA KDL-32R420A Operating Instructions Manual

Overview of the TV buttons and
indicators
1 – Remote control sensor
• Receives IR signals from the remote.
• Do not put anything over the sensor, as its
function may be affected.
2 "/1 – Power / Standby indicator
• Lights up in green when the picture is
switched off.
• Lights up in orange when the sleep timer is
set or the TV is in photo frame mode. If you
set to "On Timer", lights up in orange while
the TV is also in standby mode.
• Lights up in red when the TV is in standby
mode.
• Lights up in green when the TV is turned on.
3 "/1 – Power
Turns the TV on or off.
~
• To disconnect the TV completely, pull the plug
from the mains.
• When you turn on the TV, the power indicator
lights in green.
4 2 +/–/ /
Press to adjust the volume, or select a
channel/external input. By pressing 2 +/–,
volume can be adjusted. When the channel
Up/Down screen is displayed by pressing CH/
INPUT, channels can be selected. When the
input select screen is displayed by pressing
CH/INPUT, external input can be selected.
5 CH/INPUT
Switches between the channel Up/Down
screen, input select screen and volume Up/
Down screen.
6 Speaker
• Outputs audio signal.
15
GB