Connect Aw3000 To Your Home Wi-Fi Network; Option 1: Set Up Wireless Connection To A Non-Wps Router Through An Ios Device - Philips AW3000 User Manual

4 Connect
AW3000 to
your home Wi-
Fi network
To connect AW3000 to your existing home Wi-
Fi network, you need to apply your home Wi-Fi
settings to AW3000.
Choose your best setup method based on the
preconditions listed below.
Platform Type of
of your your Wi-
mobile Fi router
device
iOS Non-WPS No
Android Non-WPS No
Either WPS
iOS or
Android
Either Either
iOS or non-WPS
Android or WPS
Other Setup method
re-
quire-
ment
Choose option
1 (see 'Option 1:
Set up wireless
connection to a
non-WPS router
through an iOS
device' on page
9).
Choose option
2 (see 'Option 2:
Set up through
a non-WPS
Wi-Fi router and
Android device'
on page 11).
No Choose option
3 (see 'Option 3:
Set up wireless
connection to a
WPS router' on
page 14).
You Choose option
have 4 (see 'Op-
an tion 4: Set up
Eth- wired connec-
ernet tion through an
cable. Ethernet cable'
on page 15).
Before connection of AW3000 to you home
Wi-Fi network, make sure that:
a your Wi-Fi router is powered on and
working properly.
b AW3000 has been powered on and
booted up successfully (see 'Connect
power and switch on' on page 7).
c you have jotted down your Wi-Fi
password.
Once connected successfully, AW3000 will
remember your home Wi-Fi settings. Then
you can play music or listen to Internet radio
via Philips AirStudio whenever AW3000 is
powered on and connected to your home Wi-
Fi network automatically.
Option 1: Set up wireless
connection to a non-WPS
router through an iOS device
1
Before setup, make sure that your iOS
device is connected to your home Wi-Fi
network.
2
Read the Wi-Fi setup instructions on the app.
EN
9