Option 2: Set Up Through A Non-Wps Wi-Fi Router And Android Device - Philips AW3000 User Manual

8
Enter the password of your home Wi-Fi
network, tap Done to finish input, and then
tap Next.
* If your Wi-Fi password contains such special
characters as #/:/;/', you need to change your
password.
9
Name your speaker as you like, and then
tap OK to connect AW3000 to your
home Wi-Fi network.
10
Wait until the power/status indicator on
AW3000 turns solid white.
» The following app screen appears.
» AW3000 is connected to your home
Wi-Fi network successfully.
Tip
•
After successful network setup, you can tap Rock n'
Roll on the above app screen to get ready for music
play directly. For more details, go to the 'Play' section
(see 'Play' on page 16).
Option 2: Set up through a
non-WPS Wi-Fi router and
Android device
1
Before setup, make sure that your Android
device is connected to your home Wi-Fi
network.
EN 11