Function Menu - Panasonic AKHVF70 User Manual

How to use on-screen menus
z MARKER menu
z
Item Set value
MARKER OFF
ZONE OFF
13:9
14:9
CNSCO2.39
CNSCO2.35
VISTA
95%
93%
90%
88%
80%
USER85%
4:3 OFF
95%
93%
90%
88%
80%
USER85%
BACK NORMAL
HALF
BLACK
CENTER OFF
CROSS HATCH HIGH
LOW
OFF
SIZE
*1 Press the SELECT dial and wait until the set value changes to light
blue to change it.
(continued)
_indicates factory default settings.
Remarks
Determines whether markers will be
ON displayed in the viewfinder.
OFF : Not displayed
ON : Displayed
Selects the type of marker.
4:3 OFF : No marker display
4:3 : 4:3 size marker
13:9 : 13:9 size marker
14:9 : 14:9 size marker
CNSCO2.39:
2:1
2.39 : 1 size marker
CNSCO2.35:
2.35 : 1 size marker
2:1 : 2:1 size marker
VISTA :
1.85:1 size marker
95% : 95% area marker
93% : 93% area marker
90% : 90% area marker
88% : 88% area marker
80% : 80% area marker
USER85%:
Can be set in 1% increments
in the 80% to 100% range
(default setting is 85%)
Use this to select the type of marker
displayed in 4:3 video aspect ratio
OFF : No marker display
95% : 95% area marker
93% : 93% area marker
90% : 90% area marker
88% : 88% area marker
80% : 80% area marker
USER85%:
Can be set in 1% increments
in the 80% to 100% range
(default setting is 85%)
Sets the background brightness
outside the marker set in the ZONE
item.
NORMAL : Normal background
HALF : 50% background
brightness
BLACK : 0% (black) background
brightness
Sets the center marker display.
ON OFF : Not displayed
ON : Displayed
Sets the cross hatch grid display and
its density.
HIGH : Displays a bright cross hatch
grid
LOW : Displays a dim cross hatch
grid
OFF : Not displayed
60 Selects size of cross hatch.
60 : 60 dots and 60 lines
30
30 : 30 dots and 30 lines
z FUNCTION menu
z
Item
FUNCTION1
PIXEL TO PIXEL
FOCUS-IN-RED
FUNCTION2
PIXEL TO PIXEL
FOCUS-IN-RED
FUNCTION3
PIXEL TO PIXEL
FOCUS-IN-RED
* 1
FUNCTION
DISPLAY
*1 The settings are canceled when the power is turned OFF.
* 1
*2 Magnifies the center portion of the screen. The
the top left of the screen when the function is on.
*3 During FOCUS-IN-RED operation, you can use the SELECT dial to
change detection sensitivity.
_indicates factory default settings.
Set value Remarks
SCAN Selects functions assigned to the [F1]
WFM to [F3] function buttons.
MARKER SCAN:
Switches between underscan and
normal display
CROSS HATCH WFM:
MONO Shows the waveform display
UNDEF screen
MARKER:
SCAN
Displays the marker
WFM
PIXEL TO PIXEL:
MARKER
Turns the PIXEL TO PIXEL
function ON or OFF
FOCUS-IN-RED:
CROSS HATCH
Turns ON or OFF the function that
MONO
highlights in red the portion of the
UNDEF
image that is in focus.
CROSS HATCH:
SCAN
Turns ON or OFF the cross hatch
WFM
grid display
MARKER
MONO:
Switches between color and
monochrome display
CROSS HATCH
UNDEF:
MONO
Does not assign a function
UNDEF
OFF Selects the display settings and
ON1 action settings (1 touch, 2 touches,
ON2 OFF) of functions assigned to
function buttons [F1] to [F3].
OFF : The function is not displayed
ON1 : 1 touch activates and displays
operation
ON2 : 2 touches activate and display
operation
P-P
* *
1 2
* *
1 3
mark appears at
11