Table of Contents
Advertisement
Playing Back Pictures
Insert the card (P11), press the
Power button and turn the unit [ON].
The image data is displayed on the TV screen.
1
Press w/q to select the picture.
10:00 DEC. 1. 2006
Date of shooting
w : Play back the previous picture.
q : Play back the next picture.
The picture following the last one is the first picture.
•
Press and hold w/q and the pictures
•
change successively.
The date of shooting shown is according
•
to the date recorded with the image, so it
may not be the actual date of shooting.
When [ROTATE DISP.] (P23) is set to [ON],
•
pictures recorded by holding the camera
vertically are played back vertically.
This unit is based on the DCF standards (Design
•
rule for Camera File system) which was established
by the Japan Electronics and Information Technology
Industries Association (JEITA).
The file format that can be played back with
•
this unit is JPEG (maximum resolution: 4224
x 3168 pixels; maximum file size: 9 MB;
minimum resolution: 160 x 120 pixels). (There
are also pictures that on some occasions
cannot be played back in JPEG format.)
Depending on the recording condition of the
•
picture, quality may deteriorate when you
play it back. (The pictures are displayed as
[THUMBNAIL IS DISPLAYED] on the screen.)
When changing the folder name or file name
•
on a PC, the pictures will not be played back.
Playback/Menu
100-0001
When playing back a file out of standard,
•
the folder/file number is indicated by [−]
and the screen may turn black.
An interference fringe may appear on the
•
screen depending on the subject. This is
called moire. This is not a malfunction.
n To delete characters or icons shown
on the screen
Press [DISPLAY].
The screen changes as follows each time you
press the button. Actual displays depend on
the recording condition of the images.
Display
1ST DAY 1 month 10days
10:00
Display with recording
information and histogram
P
F2.8 1/100
10:00
No display
*1 If you took the picture with [TRAVEL DATE] set,
the day of the vacation you took the picture is
displayed.
*2 The baby's age is displayed if you set the baby's
birthday in [BABY1]/[BABY2] scene mode and
selected [WITH AGE].
*3 A histogram is a graph that displays brightness
along the horizontal axis and the number of
pixels at each brightness level on the vertical
axis. The values shown on the histogram are
approximate.
100 0001
1/3
DEC. 1.2006
※3
100 0001
1/3
200
AUTO
ISO
DEC. 1.2006
LSQT1098
1
Advertisement
Table of Contents
